Scope of use of concrete fencing
Modern turnkey concrete fences are very popular. This type of fencing can be used for any type of plot, country estates or commercial properties, summer cottages, defining the boundaries of a territory located on a slope.
High quality
When ordering a structure of this type, it is very important to take into account that concrete sections are heavy enough, they require a reliable foundation that can withstand the pressure of the material. Before starting work, we carry out a complete design, allowing you to accurately select the type of sections and calculate the features of future installation.
Reliability
You can order a fence made of concrete sections of the following types from us:
regular one-sided;
two-sided with decorative coating (under brick, natural stone, wood);
blind sectional fences;
openwork cast, combined (with openwork top and solid bottom);
blown;
various shades or standard gray fences.
In the gallery you can choose a concrete fence that will suit any site, performing protective and aesthetic functions.
Double-sided fences - beautiful, solid and practical
With the current level of solutions for the arrangement of the site, its landscape, there is a need for fences that would look beautiful externally and serve for a long time.
Eurofences made of Ultraconcrete are suitable for solving this problem in many ways. Depending on the need, they can be one-sided and two-sided. The first option is acceptable for arranging the site along the entire perimeter. The second is most attractive for fencing opposite a house building. In order for the beautiful fence you choose to serve for many years and bring joy, you need to take care of its competent selection and correct installation. How to choose and install a concrete fence with one-sided gloss is described in detail in the article: Planning and installation of a Eurofence made of Ultraconcrete. Therefore, we will focus on double-sided ones. And so. The decision has been made. The fence should look beautiful both from the street and from the house.
We choose its height, the type of fencing, additional elements that interest you. Post lighting, pouring the foundation, etc. We calculate the number of elements for assembling the fence. If the distance between adjacent posts, with slabs inserted into them, is: 2.05 m and knowing the length of the area to be fenced, it is not difficult to calculate the number of required elements. In this case, it is necessary to take into account some points.
Professional fence installation.
This issue is usually handled by specialized teams with a set of necessary tools and skills. But you can do it yourself. The time and effort spent on its installation is compensated by considerable savings. Planning the site on which the most beautiful, in your opinion, fence of Voronezh will be erected should begin with the exact designation of the fence line on your site. This is done using a stretched cord. With a starting and ending point. With markings for the wicket or gate, if any. The horizontal difference in the site on the line of the proposed structure is determined. For this, you can use a laser level, if available, or a hydro level. If the difference between the end points is insignificant, 20 - 25 (cm), the fence will pass in a straight line along the horizon. In the case of a significant difference (more than 25 cm), it is necessary to divide its value evenly across all spans. With such a drop, the upper contour of the concrete fence will pass in a straight line, which will visually smooth out the difference.
We have decided on the difference, and we proceed directly to the installation of the double-sided fence. A hole is prepared for the installation of the starting (zero) post. Its dimensions are larger than for a regular fence, since in our case two fences will be installed at the same time with their front sides turned relative to each other. Therefore, the size of the hole is: 70 * 70 (cm). The depth is determined depending on the calculation of the horizontal drops. Two starting posts are installed and fixed with wedges or bricks, with their back sides turned. The distance from the front side of the post to the guide cord is 5 mm. Considering that the direction is controlled only for one fence, the second post, which is an element of the other, is simply installed nearby. Next, the slabs are placed. One side is inserted into the grooves of the starting posts. The other is installed on the substrates (bricks) and leveled with adjusting spacers (wooden slats 2 - 3 (mm) thick) strictly to the horizontal level using a building level. In this case, they are located parallel to the stretched cord.
Call us, our specialists are ready to answer any of your questions. If for any reason you cannot call or did not get through, write to us and we will call you back!
+1710-000-0000
+1710-000-0000
USA, Tallahassee